Analisis Pekerjaan Pondasi pada Proyek Pembangunan Rumah Tinggal di Komplek Taman Mutiara, Jakarta Barat

Era Agita Kabdiyono; Alizar Alizar; Andika Lubis

doi:10.58169/jusit.v4i1.1223

Authors

Era Agita Kabdiyono Universitas Dian Nusantara
Alizar Alizar Universitas Dian Nusantara
Andika Lubis Universitas Dian Nusantara

DOI:

https://doi.org/10.58169/jusit.v4i1.1223

Keywords:

Construction Efficiency, Foundation Work, Project Management, Shallow Foundation, What-If Analysis

Abstract

Foundations are a critical component of building construction as they serve as the primary structural support for the superstructure. This study analyzes the foundation work carried out in a residential housing construction project at Taman Mutiara Residential Complex, West Jakarta, with the aim of evaluating the effectiveness of the foundation construction process in terms of technical implementation, time efficiency, and the challenges encountered during execution. The research employed a case study approach incorporating field observations and quantitative analysis of the project's technical data. The collected data included the type of foundation used, material specifications, construction methods, and factors influencing the successful execution of the foundation work. The evaluation covered all stages of construction, including site excavation, reinforcement installation, concrete casting, and post-casting curing. In addition, project management analysis was conducted to assess the conformity between the planned and actual implementation based on the aspects of time, cost, and quality. The results indicate that the shallow foundation system adopted in this project complied with the applicable construction standards, including SNI 2847:2019. Nevertheless, several challenges were identified during the construction process, particularly delays in material delivery and technical errors in reinforcement installation. These issues affected the project schedule but were successfully addressed through corrective measures and improved field supervision, allowing the project to maintain the required construction quality standards.

References

Abdelrahman, M., El Wakil, A., & Hegazy, T. (2021). Risk-based analysis of deep foundation construction: A systematic review. Journal of Construction Engineering and Management, 147(11), 04021159. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002191

Andi Irawan, H. (2016). Pembangunan gedung pelayanan komprehensif RSJD Dr. Amino Gondohutomo [Laporan kerja praktik].

Assa, V. A., et al. (2020). Kapasitas daya dukung pondasi dangkal dengan data sondir di Kelurahan Kairagi Dua, Manado. Jurnal Teknik Sipil Terapan, 2(2), 47–61. https://doi.org/10.47600/jtst.v2i2.250

Badan Standardisasi Nasional. (2017). SNI 8460:2017 persyaratan perancangan geoteknik.

Badan Standardisasi Nasional. (2019). SNI 2847:2019 persyaratan beton struktural untuk bangunan gedung.

Badan Standardisasi Nasional. (2020). SNI 1727:2020 beban desain minimum dan kriteria terkait untuk bangunan gedung dan struktur lain.

Bowles, J. E. (1988a). Analisa dan desain fondasi (Jilid 1). Erlangga.

Bowles, J. E. (1988b). Analisa dan desain fondasi (Jilid 2). Erlangga.

Bowles, J. E. (1997). Foundation analysis and design (5th ed.). McGraw-Hill.

Chen, J., Zhao, H., & Li, Y. (2020). Intelligent construction technology for bored pile foundation based on BIM and IoT. Advances in Civil Engineering, 2020, 1–12.

Das, B. M. (2018). Principles of geotechnical engineering (9th ed.). Cengage Learning.

Das, B. M. (2019). Principles of foundation engineering (9th ed.). Cengage Learning.

Dipohusodo, I. (1996a). Manajemen proyek & konstruksi (Jilid 1). Kanisius.

Dipohusodo, I. (1996b). Manajemen proyek & konstruksi (Jilid 2). Kanisius.

Gramedia. (2023). Strauss pile. https://www.gramedia.com/best-seller/pondasi-strauss-pile/

Hardiyatmo, H. C. (2015). Analisis dan perancangan fondasi I (Edisi ke-3). Gadjah Mada University Press.

Hardiyatmo, H. C. (2018). Analisis dan perancangan fondasi II (Edisi ke-4). Gadjah Mada University Press.

Hardiyatmo, H. C. (2019a). Mekanika tanah I (Edisi revisi). Gadjah Mada University Press.

Hardiyatmo, H. C. (2019b). Mekanika tanah II (Edisi revisi). Gadjah Mada University Press.

Kerzner, H. (2022). Project management: A systems approach to planning, scheduling, and controlling (13th ed.). John Wiley & Sons.

Meyerhof, G. G. (1951). The ultimate bearing capacity of foundations. Géotechnique, 2(4), 301–332. https://doi.org/10.1680/geot.1951.2.4.301

Pamungkas, A., & Harianti, E. (2013). Desain pondasi tahan gempa. Andi.

PBI 1971 N.I-2. (1979). Peraturan beton bertulang Indonesia 1971. Direktorat Penyelidikan Masalah Bangunan.

Project Management Institute. (2021). A guide to the project management body of knowledge (PMBOK® guide) (7th ed.).

Putra, A. P. (2020). Proyek pembangunan gedung BCA KCU Bukit Darmo PT. Tatamulia Nusantara Indah [Laporan kerja praktik].

Rani, H. (2016). Manajemen proyek konstruksi. Deepublish.

Reese, L. C., Isenhower, W. M., & Wang, S. T. (2006). Analysis and design of shallow and deep foundations. John Wiley & Sons. https://doi.org/10.1002/9780470172773