Analisis Pengendalian Kualitas Pada Proses Produksi Komponen Kursi Susun Menggunakan Metode SPC(Statistical Process Control)
DOI:
https://doi.org/10.58169/jusit.v1i1.152Keywords:
Quality, Stacking Chair Components, Statistical Process ControlAbstract
- Metalindo Perkasa is a company engaged in the field of furniture that produces chairs. In the production process of stacking chair components, there are problems encountered, namely the number of defects that exceed 1% of the standard determination. It can be a maximum lack of opinion on the company.The research was conducted with the aim of finding solutions to the factors that cause disability and finding action solutions to minimize disability. The method used in this research is Statistical Process Control (SPC). The results showed that the types of defects found were hollow, bent and curly.Factors that cause defects are human factors, machine factors, method factors, action solutions to eliminate defects by training operators, carrying out machine maintenance and checking machine components regularly and increasing supervision when setting degrees.
References
Didi Haryono, I. (2015). Pengendalian Kualitas Statistik(Pendekatan Teoritis Dan Aplikatif). Makassar: Alfabeta, Cv.
Dorothea, wahyu arini. (2021) Manajemen Kualitas.universitas terbuka
David Andriatna Kusuma, Tita Talitha, R. S. (2015). Pengendalian Kualitas Untuk Mengurangi Jumlah Cacat Produk Dengan Metode Quality Control Circle (Qcc) Pada Pt.Restomart Cipta Usaha (Pt.Nayati Group) Semarang. Eprints.Dinus.Ac.Id/17539, 1, 1–6.
Ekoanindiyo, F.A (n.d). Pengendalian Cacat Produk Dengan Pendekatan Six Sigma .1962
Hariyanto, M. A. (2017). Pengendalian Kualitas Produk Roti Tawar Menggunakan Metode Stastical Process Controll . Simki-Economic, 1-15.
Izza, A., & Retnowati, D. (2021). Analisis Kualitas Produk Furniture Dengan Pendekatan Metode Six Sigma. Jurnal Heuristic, 59-72.
Iqbal, Muhammad, (2018). Analisis Pengendalian Kualitas Dengan Metode Statistial Process Control (SPC) Dalam Upaya Mengurangi Tingkat Kecacatan Produk Pada C.V Kobe Global International. Universitas Widyatama
Ishikawa, Kaoru, (1971). Guide to Quality Control. Nordica International Limited. Hongkong
M.Z., Y., & Nurcahyo, R. (2013). TQM Manajemen Kualitas Total Dalam Perspektif Teknik Industri.
Montgomery, D. C. (2009). Introduction to Statistical Quality Control (Sixth Edit). John Wiley & Sons, Inc.Jakarta Barat: PT Indeks Permata Puri Media.
Prawirosentono, Suyadi (2007). Filosofi Baru Tentang Mutu Terpadu. Edisi 2. Bumi Aksara, Jakarta. 5
R. Elyas1, & W. Handayani*)2. (2020). StatisticalL Process Controll (SPC) Untuk Pengendalian Kualitas Produk Mebel Di UD. IHTIAR JAYA. Bisma: Jurnal Manajemen,, 50.
Septiana, I. (2019). Srategi Pengendalian Kualitas Produk Sofa Inul Dengan Menggunakan Metode Statistical Process Control (SPC) Pada Ikm Noni Meubul Di Banjarsari Kabupaten Ciamis. Jurnal Media Teknologi, 92.
Sutawidjaya, A. H., Nawangsari, L. C., & Djamil, M. (2019). Operasi Strategi Dan Proses Manajemen Pendekatan Praktis Untuk Industri 4.0. Jakarta: Mitra Wacana Media.
Suhartini, N. (2022). Penerapan Metode Statistical Prosess Control (SPC) Dalam Mengidentifikasi Faktor Penyebab Utama Kecacatan Pada Proses Produksi Produk ABC. Jurnal Ilmiah Teknologi Dan Rekayasa, 10-23.
