Pembuatan Alat Peraga Sistem Kerja Lampu Rem Belakang Sepeda Motor sebagai Media Pembelajaran Jurusan Teknik Sepeda Motor Kelas XI di SMK Negeri 1 Nisam
DOI:
https://doi.org/10.58169/saintek.v3i2.659Keywords:
Learning Media, Motorcycle Body Electrical System, Learning OutcomesAbstract
The learning process can proceed well if aided by the presence of teaching aids.Because the teaching aid for the electrical system of the motorcycle rear brake light was not available, this teaching aid was created.The purpose of this research is to determine: (1) the method of creating a teaching aid for the rear motorcycle brake light system, (2) the feasibility level of the teaching aid for the rear motorcycle brake light system, and (3) the students' response to the teaching aid for the rear motorcycle brake light system.This research uses a development research approach, also known as Research and Development (R&D). The Research and Development (R&D) method is a research method used to produce a specific product and test its effectiveness. This research will be conducted at SMK Negeri 1 Nisam. The implementation will be carried out in the even semester of the 2024/2025 academic year. This research and development uses 3 methods in data collection. The methods used are observation, questionnaires, and documentation. The data analysis technique used in this research is descriptive analysis, which presents the results of product development in the form of learning media, testing the validity and suitability of the product for implementation in the electrical system of motorcycle rear brake lights.The results of the research on the development of teaching media props, which have gone through several stages such as potential issues, data collection, product design, product validation, design revision, product testing, until it became a teaching media prop for the electrical system of the motorcycle brake light. The results obtained from the material expert validation were 91.31% by validator 1 and 95.13% by validator 2. The media expert validation results were 97.91% by validator 1 and 97.91% by validator 2. The results of the students' responses to the teaching aids, after calculations, showed a total response score of 506 out of 572 overall. With a final score percentage of 88.46% and the qualification of the developed teaching aids' response being in the "Very Good" category.
References
Aghni, R. I. (2018). Fungsi dan jenis media pembelajaran dalam pembelajaran Akuntansi. Jurnal Pendidikan Akuntansi Indonesia, 16(1), 98-107.
Anwar, MN. 2015. Identifikasi Sistem Kopling Dan Transmisi Manual Pada Toyota Kijang Innova Tipe G. Tugas Akhir. Semarang: Universitas Negeri Semarang.
Arikunto, suharsimi. 2009. Prosedur Penelitian. Jakarta: Rineka Cipta
Arsyad. A. 2013. Media Pembelajaran, Jakarta : Pt.Raja Grafindo Persada
Bastian, Ade. 2019. "Pengembangan Media Learning Game Al-Qur'an Berbasis Multimedia lnteraktif." INFOTECH Journal 5(2):29-33.
Batubara, H. H. (2020). Media Pembelajaran Efektif. Semarang: Fatawa Publishing.
Dewi, F. F., & Handayani, S. L. (2021). Pengembangan media pembelajaran video animasi en-alter sources berbasis aplikasi powtoon materi sumber energi alternatif sekolah dasar. Jurnal Basicedu, 5(4), 253-2540.https://doi.org/10.31004/basicedu.v5i4.1229
Faiz, M. R., Sujito, S., Sumarli, S., Muladi, M., & Syah, A. I. (2022). Pengembangan T rainer Kelistrikan Sepeda Motor Untuk Meningkatkan Kompetensi Keahlian Teknik Dan Bisnis Sepeda Motor Pada Era Society 5.0 Di Smk Nu 1 Karanggeneng. Prosiding Hapemas, 3(1), 172-180.
Fatkhurrohman, F., Abdillah, F., & Fatra, F. (2021). Pengaruh Peran Guru Dan Lingkungan Belajar Terhadap Peningkatan Kompetensi Sistem Ac Xi Tkro Smk Muhammadiyah Bawang. Journal Of Vocational Education And Automotive Technology, 3(2), 44-53.
Gulo, M. (2018). Meningkatkan hasil belajar fisika dengan menggunakan alat peraga sederhana pada materi gerak melingkar di kelas X-5 SMA Negeri 3 GunungSitoli semester ganjil tahun pelajaran 2014-2015. Jurnal Wahana Inovasi, 6(1), 1-14.
Kaltsum, H. U. (2017). Pemanfaatan Alat Peraga Edukatif Sebagai Media Pembelajaran Bahasa Inggris Sekolah Dasar. URECOL, 19-24.
Laurens, J., Rampo, Y., Tamba, P., & Sumarauw, H. (2021). Pengaruh media pembelajaran trainer simulator kelistrikan terhadap hasil belajar pemeliharaan listrik siswa TSM di SMK Kristen Getsemani Manado. GEARBOX: Jurnal Pendidikan Teknik Mesin, 50-58.
Mashuri, S. (2019). Media Pembelajaran Matematika. Deepublish.
Masyruhan, M., Pratiwi, U., & Al Hakim, Y. (2020). Perancangan alat peraga hukum hooke berbasis mikrokontroler arduino sebagai media pembelajaran Fisika. SPEKTRA: Jurnal Kajian Pendidikan Sains, 6(2), 134-145. http://dx.doi.org/10.32699/spektra.v6vi2i.145
Muntazhimah, M., Nasution, E. Y. P., & Ningsih, S. Y. (2020). Respon siswa sekolah menengah terhadap pembelajaran matematika di era COVID-19. Jurnal Pendidikan Matematika Universitas Lampung, 8(3), 193-206. http://dx.doi.org/10.23960/mtk/v8i2.pp193-206
Mustofa, T. A., Sarsetyono, Y., & Apriyanto, N. (2020). Peningkatan Kompetensi Sistem Kelistrikan Sepeda Motor Melalui Model Problem Based Learning Dengan Video Animasi Kelistrikan Bodi Pada Siswa. Journal of Vocational Education and Automotive Technology, 2(1), 30-40.
Nini, N. V. (2019). Respon siswa terhadap media pembelajaran interaktif berbasis flash pada materi sel kelas XI di SMAN 1 Sandai Kabupaten Ketapang. Progress in Retinal and Eye Research. UNIVERSITAS MUHAMMADIYAH PONTIANAK PONTIANAK.
Rasto. 2015. Pembelajaran Mikro. Bandung: AlfabetaSakdiah, H., Fatwa, I., Muliani, M., Andriani, R., & Hidayat, A. T. (2023). Sosialisasi Budaya Kerja Industri Sebagai Upaya Penguatan Kompetensi Dasar Siswa SMK Negeri 7 Lhokseumawe. Jurnal Abdimas BSI: Jurnal Pengabdian Kepada Masyarakat, 6(2), 208–217. https://doi.org/10.31294/jabdimas.v6i2.15086
Sanjaya. Ridwan. 2017. Pengaruh Kelengkapan Sarana dan Prasarana Terhadap Hasil Belajar Siswa sekolah Menengah Kejuruan (SMK). Universitas Negeri Padang
Sugiyono. 2013. Metodelogi penelitian kuantitatif, Kualitatif dan R&D. Bandung Alfabeta.
Sugiyono. 2016. Metode Penelitian dan Pengembangan (Research and Development). Bandung: Alfabeta.
Sugiyono. 2018. Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung: Alfabeta.
Sugiyono. 2019. Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung: Alfabeta.
Wahyudi, A., Agustin, R. D., & Ambarawati, M. (2022). Pengembangan Media Aplikasi Geotri Pada Materi Geometri Berbasis Mobile Learning. Jurnal Ilmiah Matematika Realistik, 3(2), 62-70.
Zaidah, B. S., Susilawati, S., & Sutrio, S. (2022). Validitas Perangkat Pembelajaran Berbasis Masalah Berbantuan Alat Peraga Suhu dan Kalor Untuk Meningkatkan Penguasaan Konsep Peserta Didik. Lensa: Jurnal Kependidikan Fisika, 10(2), 39-53. https://doi.org/10.33394/j-lkf.v10i2.6805
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Fatimah Zuhra, Abubakar Abubakar, Islami Fatwa
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
